1. Composition & Basic PropertiesTable 1: Fundamental CharacteristicsParameterSpecificatio
E-posta adresi: info@standard-groups.com
| Parameter | Specification Range |
|---|---|
| Chemical Base | MS Polymer (Silane-terminated polyether) |
| Görüntü | Paste-like, non-sag |
| Yoğunluk | 1.2-1.4 g/cm³ |
| Solids Content | ≥99% |
| Tack-free Time | 15-60 minutes |
| Cure Mechanism | Moisture curing |
| Full Cure Time | 24-72 hours |
| Shore A Hardness | 20-60 |
| Elongation at Break | ≥200% |
| Type | Key Features | Primary Applications |
|---|---|---|
| Standard Grade | Good adhesion, UV resistant | Construction joints, glazing |
| Elastic Grade | High elongation (≥400%) | Expansion joints, concrete repair |
| Low-modulus | Reduced stress on substrates | Sensitive materials bonding |
| Fast-cure | Tack-free in <30 minutes | Production line applications |
| Paintable | Compatible with coatings | Architectural finishes |
| Property | MS Sealant | Polyurethane | Silicone | Acrylic |
|---|---|---|---|---|
| Adhesion | Excellent | Good | Excellent | Fair |
| Paintability | Evet. | Limited | Hayır, hayır. | Evet. |
| UV Resistance | Excellent | Good | Excellent | Fair |
| Movement Capacity | ±25-50% | ±25% | ±50% | ±10-15% |
| Temperature Range | -40°C to +90°C | -40°C to +80°C | -60°C to +200°C | -20°C to +70°C |
| VOC Content | Low | Medium | Low | Medium |
Superior adhesion to most substrates without primer
Excellent weather resistance and UV stability
Paintable surface after full cure
Low VOC and odor compared to polyurethanes
Good elasticity with permanent flexibility
Non-staining to porous materials
| Parameter | Requirement |
|---|---|
| Substrate Temp | 5°C-40°C |
| Ambient RH | 40-80% |
| Joint Design | Depth:Width = 1:1 to 2:1 |
| Tooling Time | 5-15 minutes |
| Minimum Application Thickness | 3 mm |
| Maximum Application Thickness | 15 mm (single application) |
| Aspect | Specification |
|---|---|
| Shelf Life | 9-12 months (unopened) |
| Storage Temp | 5-25°C |
| Packaging | Cartridge, sausage, pail |
| Skin-over Time | 10-30 minutes |
| Clean-up | Specific solvent before curing |
Sorumluluktan vazgeçme: Yukarıdaki içerik yalnızca endüstri içindeki kişiler arasında referans ve iletişim amacıdır ve doğruluğunu veya eksiksizliğini garanti etmez. İlgili yasa ve düzenlemelere ve bu web sitesinin düzenlemelerine göre, ilgili ürünleri satın alan birimler veya bireyler geçerli nitelikler ve nitelik koşulları almalıdır.
Şirket Telefonu
+86-21-6420 0566
Çalışma saatleri
Pazartesi - Cuma
Cep telefonu:
13816217984
E-posta adresi:
info@qinsun-lab.com
