Formulation：Green pigment 12%+Polyol 55%+Extenders 25%+Additive 8%2-Component Polyurethane Flooring
E-posta adresi: info@standard-groups.com
Formulation：Green pigment 12%+Polyol 55%+Extenders 25%+Additive 8%
| Category | Specifications |
|---|---|
| Product Type | Two-part aliphatic polyurethane |
| Component A | Hydroxyl-functional acrylic resin |
| Component B | Polyisocyanate hardener (HDI trimer) |
| Mix Ratio (A:B) | 4:1 or 5:1 (volume basis) |
| Pot Life (25°C) | 30-90 minutes |
| Touch Dry | 2-4 hours |
| Full Cure | 7 days (at 25°C/50% RH) |
| Key Properties | Performance Data |
|---|---|
| Adhesion | ≥4.5 MPa (concrete) |
| Abrasion Resistance | ≤30 mg (CS-10. 1000 cycles) |
| Chemical Resistance | Excellent vs. oils, fuels, weak acids |
| Impact Resistance | 50 kg·cm (ASTM D2794) |
| Gloss Retention | >80% after 1000h QUV |
| Physical Properties | Values |
|---|---|
| Solid Content | 60-70% |
| VOC Content | 300-400 g/L |
| Recommended DFT | 80-150 μm |
| Service Temperature | -40°C to +120°C |
| Color Stability | ΔE<1 (1000h UV) |
| Application Data | Guidelines |
|---|---|
| Substrate Prep | Concrete: ISO 8501-1 Sa2.5 |
| Application Methods | Roller, brush, airless spray |
| Ambient Conditions | 10-30°C, RH<80% |
| Recoat Window | 16-24 hours |
| Coverage Rate | 0.15-0.25 kg/m²/100μm |
| Safety & Compliance | Standards |
|---|---|
| Flash Point | Component A: 38°C; B: 45°C |
| GHS Classification | H315. H317. H319. H335 |
| Shelf Life | 12 months (25°C) |
| PPE Requirements | Respirator, gloves, goggles |
| Regulatory Compliance | REACH, EPA compliant |
| Avantajları | Limitations |
|---|---|
| Superior UV resistance | Higher cost than epoxy |
| Excellent abrasion resistance | Sensitive to moisture |
| Maintains color/gloss | Requires precise mixing |
| Flexible film | Longer cure time than epoxy |
| Chemical resistant | Limited pot life |
| Comparison | Polyurethane | Epoxy |
|---|---|---|
| UV Stability | ★★★★★ | ★★☆ |
| Chemical Resistance | ★★★★ | ★★★★★ |
| Abrasion Resistance | ★★★★★ | ★★★★ |
| Moisture Tolerance | ★★☆ | ★★★★ |
| Application Window | ★★★ | ★★★★ |
Sorumluluktan vazgeçme: Yukarıdaki içerik yalnızca endüstri içindeki kişiler arasında referans ve iletişim amacıdır ve doğruluğunu veya eksiksizliğini garanti etmez. İlgili yasa ve düzenlemelere ve bu web sitesinin düzenlemelerine göre, ilgili ürünleri satın alan birimler veya bireyler geçerli nitelikler ve nitelik koşulları almalıdır.
Şirket Telefonu
+86-21-6420 0566
Çalışma saatleri
Pazartesi - Cuma
Cep telefonu:
13816217984
E-posta adresi:
info@qinsun-lab.com
