IntroductionComposition: water-soluble polymers containing hydrophobic groupsAppearance: light
E-posta adresi: info@standard-groups.com
Composition: water-soluble polymers containing hydrophobic groups
Appearance: light yellow slightly turbid viscous liquid
Active ingredient: 18%
Solvent: water
Application range:
Suitable for all types of water coating systems
| Category | Specifications |
|---|---|
| Üretim İsmi | Rheology Modifier STD-9048 |
| Chemical Type | Hydrophobically modified alkali-swellable emulsion (HASE) |
| Görüntü | Milky white liquid |
| Active Content | 30±1% |
| pH Value | 2.5-4.0 (as supplied) |
| Viscosity (25°C) | <100 mPa·s (neat) |
| Density (25°C) | 1.05 g/cm³ |
| Çözünürlük | Water-thickenable |
| Key Performance | Characteristics |
|---|---|
| Rheology Profile | Strong pseudoplastic behavior |
| pH Activation | Activates at pH >6.5 |
| Shear Recovery | >90% recovery within 60 sec |
| Compatibility | Excellent in latex systems |
| Syneresis Control | Prevents water separation |
| Applications | Recommended Use |
|---|---|
| Architectural Coatings | Interior/exterior paints |
| Textile Coatings | Print paste thickener |
| Adhesives | PSA formulations |
| Paper Coatings | Improves runnability |
| Ceramic Glazes | Controls suspension |
| Performance Advantages | Benefits |
|---|---|
| High Efficiency | 0.2-0.8% dosage sufficient |
| Spatter Resistance | Excellent roll/brush application |
| Color Acceptance | No negative impact on tint strength |
| Freeze-Thaw Stability | 5 cycles without performance loss |
| Low VOC | <5 g/L |
| Usage Guidelines | Recommendations |
|---|---|
| Activation Method | Neutralize to pH 7.5-9.5 with ammonia/amine |
| Addition Point | Post-dispersion at 25-50°C |
| Mixing | Moderate agitation (400-800 rpm) |
| Storage Conditions | 5-35°C, avoid freezing |
| Shelf Life | 12 months |
| Safety & Compliance | Standards |
|---|---|
| Flash Point | None (aqueous) |
| GHS Classification | Not hazardous |
| Regulatory Status | REACH compliant |
| Biodegradability | >60% in 28 days |
| PPE Requirements | Safety glasses recommended |
| Technical Comparison | STD-9048 | Cellulose-based |
|---|---|---|
| Viscosity Build | Faster activation | Slower hydration |
| Spatter Resistance | Excellent | Poor |
| pH Stability | Stable in pH 4-10 | Limited stability |
| Microbial Resistance | Inherent | Requires biocides |
| Cost Efficiency | 40% dosage reduction | Standard |
References:
Product Technical Data Sheet (2024)
Progress in Organic Coatings (2023)
Sorumluluktan vazgeçme: Yukarıdaki içerik yalnızca endüstri içindeki kişiler arasında referans ve iletişim amacıdır ve doğruluğunu veya eksiksizliğini garanti etmez. İlgili yasa ve düzenlemelere ve bu web sitesinin düzenlemelerine göre, ilgili ürünleri satın alan birimler veya bireyler geçerli nitelikler ve nitelik koşulları almalıdır.
Şirket Telefonu
+86-21-6420 0566
Çalışma saatleri
Pazartesi - Cuma
Cep telefonu:
13816217984
E-posta adresi:
info@qinsun-lab.com
