STD-9200 defines performance standards for advanced adhesion promoter additives designed to enhance
E-posta adresi: info@standard-groups.com
STD-9200 defines performance standards for advanced adhesion promoter additives designed to enhance substrate bonding in challenging coating applications. This specification covers critical parameters for additives that improve interfacial adhesion across diverse material combinations.
| Property | Specification |
|---|---|
| Chemical Base | Organofunctional silane blend |
| Active Content | ≥98% |
| Density (25°C) | 0.95-1.05 g/cm³ |
| Flash Point | >100°C |
| Volatile Organic Content | <50 g/L |
| Hydrolysis Stability | 24 hours in pH 4-9 solutions |
| Characteristic | Performance Advantage |
|---|---|
| Bond Strength Improvement | Increases adhesion by 200-400% |
| Substrate Versatility | Effective on metals, plastics, glass |
| Humidity Resistance | Maintains bonding in 95% RH conditions |
| Thermal Cycling | Stable from -40°C to +150°C |
| Cure Compatibility | Works with thermal/UV curing systems |
| Coating System | Dosage Range | Incorporation Method |
|---|---|---|
| Automotive OEM | 0.5-2.0% | Pre-mix with resin |
| Industrial Maintenance | 1.0-3.0% | Add during letdown |
| Plastic Coatings | 2.0-5.0% | Substrate pretreatment |
| Powder Coatings | 0.3-1.5% | Dry blend before extrusion |
| UV-Curable Systems | 0.5-1.5% | Add before photoinitiators |
| Parameter | STD-9200 | Conventional Promoters |
|---|---|---|
| Multi-Substrate Performance | Excellent on all common substrates | Limited material range |
| Processing Window | 60-minute pot life | 20-30 minute pot life |
| Environmental Resistance | Passes 1000h salt spray | Fails at 500h typically |
| Film Flexibility | No embrittlement | May reduce flexibility |
| Application Area | Specific Uses |
|---|---|
| Transportation | Aluminum wheel coatings, plastic bumpers |
| Aerospace | Composite bonding, radar dome coatings |
| Electronics | Conformal coatings, circuit board protection |
| Construction | Architectural glazing, facade coatings |
| Consumer Goods | Appliance finishes, tool coatings |
| Aspect | Requirement |
|---|---|
| Storage Temperature | 15-30°C in nitrogen atmosphere |
| Shelf Life | 12 months in unopened containers |
| Personal Protection | Chemical goggles, vapor respirator |
| Spill Procedure | Absorb with silica gel, ventilate area |
| Disposal Classification | Hazardous waste (halogen-free) |
STD-9200 adhesion promoter additive provides a robust solution for demanding coating applications where substrate bonding is critical. The specification ensures consistent performance across various industrial sectors, offering exceptional durability under extreme environmental conditions while maintaining coating flexibility. Its balanced formulation addresses modern challenges in adhesion technology without compromising processing characteristics or final film properties.
Sorumluluktan vazgeçme: Yukarıdaki içerik yalnızca endüstri içindeki kişiler arasında referans ve iletişim amacıdır ve doğruluğunu veya eksiksizliğini garanti etmez. İlgili yasa ve düzenlemelere ve bu web sitesinin düzenlemelerine göre, ilgili ürünleri satın alan birimler veya bireyler geçerli nitelikler ve nitelik koşulları almalıdır.
Şirket Telefonu
+86-21-6420 0566
Çalışma saatleri
Pazartesi - Cuma
Cep telefonu:
13816217984
E-posta adresi:
info@qinsun-lab.com
